How to Use and Maintain the Manual Strands S68 Drilling Machine
How to Use and Maintain the Manual Strands S68 Drilling Machine
The Manual Strands S68 is a pillar drilling machine that can perform various drilling operations on metal and wood. It is a reliable and durable machine that has been used for many years by professionals and hobbyists alike. In this article, we will explain how to use and maintain the Manual Strands S68 drilling machine.
Manual Strands S68
How to Use the Manual Strands S68 Drilling Machine
The Manual Strands S68 drilling machine has a spindle that can be moved up and down by a handwheel or a lever. The spindle can also be tilted by loosening the clamping screws on the headstock. The spindle speed can be adjusted by changing the position of the belt on the pulleys. The machine has a table that can be raised or lowered by a handwheel, and rotated by loosening the locking screw. The table also has slots for clamping the workpiece or a vise.
To use the Manual Strands S68 drilling machine, follow these steps:
Make sure the machine is plugged into a power source and switched on.
Select the appropriate drill bit for the material and the hole size you want to make. Insert the drill bit into the chuck and tighten it with a chuck key.
Adjust the spindle speed by moving the belt to the desired pulley. Refer to the speed chart on the machine for guidance.
Position the workpiece on the table and secure it with clamps or a vise. Make sure there is enough clearance between the drill bit and the table.
Adjust the table height and angle by using the handwheels and locking screws. Align the drill bit with the center of the hole you want to make.
Move the spindle down by turning the handwheel or pulling the lever. Apply moderate pressure and feed the drill bit into the workpiece. Do not force or overheat the drill bit.
When you reach the desired depth, retract the spindle by reversing the handwheel or lever. Remove the workpiece from the table and inspect the hole.
Repeat steps 4 to 7 for any additional holes you want to make.
How to Maintain the Manual Strands S68 Drilling Machine
The Manual Strands S68 drilling machine requires regular maintenance to ensure its optimal performance and longevity. Here are some tips on how to maintain your Manual Strands S68 drilling machine:
Clean the machine after each use. Wipe off any dust, chips, oil, or grease from the surfaces with a soft cloth. Use a brush or compressed air to remove any debris from hard-to-reach areas.
Lubricate the moving parts of the machine periodically. Apply a few drops of oil to the spindle bearings, pulleys, gears, shafts, and screws. Use grease for the sliding surfaces of the table and headstock.
Check the condition of the belt, drill bits, chuck, and other accessories regularly. Replace any worn or damaged parts as soon as possible.
Store the machine in a dry and cool place. Cover it with a cloth or plastic sheet to protect it from dust and moisture.
By following these instructions, you can use and maintain your Manual Strands S68 drilling machine safely and efficiently. e0e6b7cb5c